St Aubin - blocks, pads and work berths

Please select one of the options to see it's availability on the calendar.

For safety, please check the suitability of your vessel to take the ground on working berths or to dry out on the blocks and pads before booking. If in doubt, please speak to your Marine Trader.

You will receive an email confirming your booking, if you need to amend or cancel your booking you can do so through a link in the email.

Information ‌

Please consider how your activities impact the enviroment. Jersey Marinas strongly advise against the power washing of vessel hulls with self eroding anti fouls on blocks and pads.
You should always follow best practice wherever possible. Please check the RYA advice on how you can reduce your environmental impact here
Learn more about the antifoul and different alternatives on the RYA Green Blue website here.

Harbour map ‌

St Aubins work berths
Dries @ approx: 9.5m (31’) ACD
Bookings allocated on a 10 day basis
Boatowners will need to set up their mooring lines prior to moving their vessel onto a work berth. These must be removed once vessel is removed from work berth

St Aubins No.1 (Old Blocks)
Dries @ 9.14m (30’) ACD

St Aubins No.2 (Old Pad)
Dries @ 9.14m (30’) ACD

St Aubins No.3 (New Blocks)
Dries @ 8.53m (28’) ACD

St Aubins No.4 (New Pad)
Dries @ 8.53m (28’) ACD, 1 Ton Maximum

‌Tidal Access

- St Aubins Causeway (5.0M)

‌Jersey tides
‌
‌- ‌Tides

Other location
‌
‌- St Helier
‌- Gorey

Guides

‌-  Please use the staples/cleats to tie to, not the railings
‌-  Please do not tie the top of a mast to the railings,
    put loose looped rope around the mast to the cleats
‌-  Please allow enough slack in ropes for tidal movement
‌-  Careful consideration should be given to working underneath
‌-  If in doubt consult your marine trader

Please consider how your activities could impact the environment.
You should always follow best practice wherever possible.
Learn more about the antifoul awareness campaign visit thegreenblue.org.uk